cheap Concrete Repairs Material in Appium

Anchoring Agent
Anchoring agent is used for high strength corrosion resistant anchoring of bolts and bars into concrete, rock, masonry or brickwork where high speed of installation and early application of load is required. Permanent installation of reinforcement starter bars, foundation bolts, base plates, balustrading, barriers and safety fences, railway tracks, tie-back anchors, reinforcement dowelling abutments, ground anchors for towers, cranes, dock sills.
Standards Compliance
Materials tested in accordance with BS EN 1504-6.
Main Use & Advantages
1. Rapid strength gain
2.Vibration resistant
3.micro expansive.
4.Can be placed under water
Typical Properties
1. Early high strength: The strength after 30min is at least 8MPa, and 20Mpa after 3 hours
2. Initial setting time <6mins and terminal setting time <30mins When water-cement ratio is 0.3 .
3. After 30 mins, Drawing force >4tons ; after 1 hour, drawing force>6 tons
Packing ,Storage and Transportation
Powder:25KG carton with inner PE film avaiblable
2.Storage: Stored in a dedicated warehouse that is well-ventilated and dry. 6 month Warranty.
3.Transportation Caution
Get rid of getting damaged by sharp-end objects while packages are being transferred or delivered. When being contaminated by high humidity or moisture in case of leakage, it can be prepared in prescribed ways for further use without surrendering any effect. cheap Concrete Repairs Material